The CAN I/O is primarly intended as
hardware for distributed industrial
control application. It can be also used
as a standard alone controller.
The CAN interface enables CAN I/O's to
participate in real time network. Complex
control algorithms can be distributed
among several decentralized stations with
a minimum of wiring.
The core of the CAN I/O's consists on
different microcontroller (Philips 80C592
/ Siemens 80C166 with external CAN cell
and Siemsn SAB C167 CR), which has onboard
upto 512 kByte EPROM or FlashEprom.
CAN
IO Type 1
Digital I/O
CAN
IO Type 2
Digital and analog I/O
CAN
IO Type 3
Digital I/O
The CAN IO Type 3 is a design for process control. It is a microcontoller- based module for distributed applications. The CAN IO Type 3 platform and the included sample control software allows to access and control the I/Os and adapt the platform easily to individual applications. Various high-level protocols for OSI Layer 2 up to OSI Layer 7 (e.g. CAL, CANopen, SDS) are supported by I+ME and are available as source code for the microcontroller and several CAN chips.
Features
Highlights
Up
to 64 I/O (32 digital in and 32 digital out)
Easy configuration and easy to use
Analog
in- and outputs and programmable counter
are available.
Designed for rough industrial environment
CAN protocol according to CAN 2.0A by
using the 8-Bit version and CAN 2.0B by using
the 16-Bit version
Configurable via CAN or RS232
On board RS 232 interface for easy development,
diagnostic and service.
Different housing for various protection
classes available
Ideal platform for real time I/O management
reduces the wiring
Flexible interfacing of various types of digital I/Os
PC program for remote control
Data (pre-)processing by the
microcontroller or direkt link of input event to
CAN
Slave board with 32 I/Os available
CANopen supported
All in- and outputs with phönix contact
connectors
Delivery content includes documention
Please download the
productsheet for more details...
CAN I/O Type 1,2,3
print friendly version