Tips & Tricks

TIP

you can find under the
   FAQ page some
   answers about the
   frequently asked questions
   from the users of our
   products

		Before installing the PC interface boards into your PC read the manual and follow the hints.
		If you AT bus card is not running, make sure that you don't use AT bus plug and play features and that the used interrupt is not used for PCI.
		If you use a PCMCIA Key, make sure that the card is completely inserted.
		Make sure that the used resources are not occupied by an other hardware.
		If you use CAN NetPorty II, make sure that it is powered and connected at the right connector, for LPT use the settings ECP, mode version 1.7 or 1.9.
		If you use a PCI-IntelliCAN and it does not work, check out the settings of your VGA card.